115 v winch has three main types of our manufacturer. Basic electric winch includes slow speed (AQ-JM model) and quick speed (AQ-JK) winch two types. The rest one belongs to humping type (AQ-JKL) winch. Consider the development trend of technology and the production capacity of industry, basic winch adopts slotted design; second level or three level cylindrical helical gear transmission; using coning rotor motor. For AQ-JKL series winch, we adopt enclosed secondary planet gear transmission; and YZR motor; you can use hand to operate two brake belt to control the start and brake of winch.
Electric and hydraulic winch
Winch Parameter:
Loading capacity: 1t—-200 t
Wire rope capacity: 20—-3600 m
Working speed: 5—-35 m/min;
Power supply: 50/60HZ,3Phase
Customized according to your requirements.
Get a Free Quote
This 115 V winch has hydraulic and electric type, the two types have the same structure. And both of them belongs to main shaft rotating machine. Maine shaft device of this winch consists if main axis, gear box, drum, ratchet wheel and bearing pedestal; reducer belongs to flexible rule surface reducer; coupling adopts elastic column axis coupling; brake adopts ratchet device, and it can be used when machine stops. Winch mount is welded by steel plate and structural steel; for electrical part, this winch uses asynchronous motor drive system, and it has units including cont-actor, buttons, electrical instrumentation and signal lights. Besides, all this can be installed on the inside of control box.
Tips when using our 115 v winch
1. Winch mount have to be fixed stably.
2. Operators should be health and have relevant certification, and get trained of safety rules.
3. Operators cannot leave winch machine when it in a working state.
4. Forbid any remould of winch equipment.
5. Operators should record the working condition of winch, including: working time of each day, load condition, repairing, checking and adjusting condition.
6. When winch reaches the limit of working time, it cannot be used anymore.
7. If you don’t use winch for a long time, you should cut off power, and store it in a dry, water proof, ventilate, and without corrosive gas.
8. Check the lubricate condition of each winch part.
Winch Parameter:
Loading capacity: 1t—-200 t
Wire rope capacity: 20—-3600 m
Working speed: 5—-~35 m/min;
Power supply: 50/60HZ,3Phase
Customized according to your requirements.
Get a Free Quote
How to operate 115 v winch
1. Forbid overload. The tension of winch rope cannot beyond its rated loads.
2. Pay attention to the function if winch rope. Wrong rope direction will makes brake and driven system failed.
3. Preparation work. Machine should be installed on flat occasion; operator should know the structure of winch and each handle.
4. Check the connection of electrical circuit, especially pay attention to ground connection and lubrication.
5. After the winch installed, test the winch. Firstly, the machine should work with empty load for 30 minutes, and then operator can add loads slowly until reach the limit of winch capacity, if nothing wrong, this winch can lift up and pull loads and materials normally.
Manufacturer of 115 v electric and hydraulic winch
You can choose hydraulic power and electricity power two types from us. No matter which winch you choose, we promise you high quality and reasonable price. This model winch belongs to customized equipment, and we need you offer detail information includes the working occasion, rope capacity, rate loads of your requirement. If you have any other need, tell us when contact.