15 Ton Winch

15 ton winch is widely used for winding, unloading, dragging the weight, such as all kinds of large and medium-sized concrete, steel structure and mechanical equipment installation and removal.

The winch is also used in construction, water conservancy, forestry, mining, port, etc material lift or drag, also as a modern electronic control automatic production line equipment.

As one of professional winch suppliers in China, our group ranks top in winch market. Our winches have advantages as large capacity, compact structure, light weight, easy operation, high safety and long service life. We provide types of winches for sale, such as high speed winch, slow speed winch, industrial hydraulic winch, electric rope winch.

For any type of winches, just send inquiry to sales@winchsupplier.com , we will reply to you asap. We design and produce winch based on customers’ needs and practical conditions.

Construction 15 Ton Winch
Construction 15 Ton Winch

JM Type Winch

Loading capacity: 0.5~200 t;

Wire rope capacity: 20~3600 m;

Working speed: 5~20 m/min;

Power supply: 220-690V,50/60HZ,3Phase;

Contact Us

Compact structure of 15 ton winch

Its main structure includes bottom frame, electric cam controller, electric hydraulic thrust brake, gear box, rope drum, electric motor, wire rope and so on.

Simple structure makes winch easy to install and disassemble, simple to maintain, convenient to transport. It can save much energy, time and cost.

Top Quality 15 Ton Winch
Top Quality 15 Ton Winch

Contact Us

Scrap standard of winch wire rope

The steel wire rope used in the hoisting machine includes phosphate coated steel wire rope, galvanized steel wire rope and smooth steel wire rope

1.Decrease in diameter;
Wear over 40% of the diameter should be scrapped, not more than 40% should be reduced coefficient of use.

2.Surface corrosion;
When the corrosion of the whole wire rope surface is obvious to the naked eye, the wire rope cannot be used.

3.Structural damage;
The whole strand of wire rope should be scrapped, and the wire rope with broken wire should be used with reduced coefficient.

4.Overload;
The steel wire rope used by overload shall not be used.

Reliable 15 Ton Winch
Reliable 15 Ton Winch

JM Type Winch

Loading capacity: 0.5~200 t;

Wire rope capacity: 20~3600 m;

Working speed: 5~20 m/min;

Power supply: 220-690V,50/60HZ,3Phase;

Contact Us

Tips of using 15 ton winch

1. The steel wire rope on the drum should be arranged neatly, if found overlapping and oblique winding, should stop to rearrange. Do not use your hands or feet to pull or step on the wire rope while rotating. The winch rope must not be let out completely, at least keep three turns.

2.The wire rope shall not be knotted or twisted, and shall be replaced when the broken wire exceeds 10% within a pitch.

3.During the operation, no one shall cross the wire rope. After the object (object) is lifted, the operator shall not leave the winch. Objects or hanging cages should be lowered to the ground when resting.

4.In the operation, the driver and signalman shall maintain good visibility with the lifting objects, and the driver and signalman shall cooperate closely and obey the unified signal command.

5.In case of power failure during operation, the power should be cut off to lower the lifting object to the ground.

6.Listen to the command personnel’s signal during work, and the signal is unknown or may cause an accident. The operation should be suspended until the situation is clear.

7.Sudden power failure in the operation, should immediately pull the knife, will be transported down.

8. When the operation is completed, the material plate shall be landed and the electric box shall be closed and locked.

8.Wire rope in the process of use and mechanical wear. Spontaneous combustion of corrosion local damage is inevitable, brush protection oil.

9.Overload use is strictly prohibited. That is to exceed the maximum carrying tonnage.

11.The use of the process should pay attention to do not appear knotting, flattening, arc damage, erosion of chemical media.

12.High temperature objects shall not be directly hoisted. Protective plates shall be added for the objects with edges and corners.

13. The steel wire rope should be checked frequently during use and scrapped immediately if it reaches the scrapping standard.