Industrial Winch

Our manufacturer provides you five types of industrial winch. There are AQ-JM crane winch, AQ-JK crane winch, AQ-JKL type industrial winch and AQ-JMM winch. They have different functions and advantages. Next is the brief introduction in detail.

Different types of industrial winch

AQ-JM type industrial winch seems like trolley on double girder crane. But it has different function. This kind of crane winch consists of motor, coupling, gear box and drum. The four basic parts are installed in the winch mount. You can use this model to pull, lift and drag loads in construction site, port and bridge building project. Moreover, AQ-JM type winch can be used in ship or near coast place to take anchoring and mooring task.

It can be used to lift and pull loads in construction sites and factories. Moreover, it usually is used in port, wharf and basic construction site to do piling work. AQ-JKL type crane industrial winch consist of motor, inner reducer, drum, main axis, clutch, nipper brake and support. AQ-JKL model winch is able to lift loads and set it to fall free, in this way, it finish the piling task. And it can put winch rope in a fast speed. Clutch and nipper brake are in an open state for the most time. It realizes the stop and start of nipper brake and clutch by two-three way reversing valve. AQ-JKL winch has compact structure, and it is easy to operate.

AQ-JMM type crane winch has the largest working ability, it can accept wire rope length under 5000 meters. If you want to do task in large mine and factories, AQ-JMM winch is your best choice. It has stable lifting and pulling speed.

Features of industrial winch

Our company is specialized in the export of machinery and equipment. We have high quality products and professional technical services team. Therefore, the industrial winch from our company all have these following features.

First of all, because we control the quality from the source material and permeate the whole process of product design, manufacturing and inspection. And the quality assurance system is built so that the quality of industrial hydraulic winch is reliable. And advanced detection equipment, meticulous inspection process, strict control assessment procedures, make every product be guaranteed.

And then, our professional design team has been updating their technology all the time. And winch machine has a variety of types to adapt to different working conditions, such as building, mine, etc.

What’s more, it has two power modes. That is to say, they can be powered by electric drive mode and hydraulic drive to achieve high efficiency of work. And in order to eliminate the local stress caused by the bad condition, the industrial winch can be designed into different types.

Industrial winch’s safety requirements

1.Set up the operating shed and ensure that the operator can see the conductor and the objects that are dragging or lifting. The construction, scaffolding and site stacking materials, components and so on shall not affect the driver’s monitoring of the whole process within the operation scope. Operating tents in hazardous operating areas shall meet the requirements of the protective shelter at the top.

2. Solid foundation.
Industrial winch should as far as possible away from dangerous operations area, choose the higher ground, soil solid, buried anchor winch wire rope and hoist fastens its seat. The front should be piling, prevention and control of hoist movement and capsized.

3. Drum direction.
For drum and guide pulley center, the distance from the drum to the first guide pulley, according to the rules is: grooved drum should be more than 15 times of the width of the reel, slot-less reel should be more than 20 times, in order to prevent the drum steel wire rope fault fold each other during operation and guide wheel flange and steel wire rope wear.

Principles of winding the wire rope

The wire rope should be drawn from the bottom of the drum. The wire rope on the tube should be arranged in order, and should be kept at least 5 times when working. The outermost wire rope should be lower than the diameter of a wire rope.

There are two common fixing methods: one is a wedge hole in the winch, and the wire rope is fixed in the hole through a wedge joint. The other is to have holes in the side baffle of the industrial winch drum, and the steel wire rope’s head is worn out and the screw is pressed to the outside of the side plate of the drum. Other methods have not been seen for the time being.

More information of industrial winch

The main products of us are jib crane, overhead crane/bridge crane/EOT crane, gantry crane hoist, travel lift and industrial winch. All these machines can be designed and customized with different configurations according to clients’ needs and requirements. Our company has decades of experience in manufacturing industrial winch machine and has produced many winches for different clients from all over the world and all our products have been highly recognized by our customers because of the high quality and good operating performance.

We supply a wide range of tonnages and types of winch machines used for lifting, pulling, launching and transporting materials and other equipment. And they are suitable for many tonnages and types in various kinds of shapes and designs. Believe us, and it will be your good choice for your selecting industrial winch machine. To get professional and satisfactory industrial winch machine, just don’t hesitate to contact us and you will be very satisfied with the industrial winch provided by us.